Video player 2.0
- Agnieszka Wisniewska
Video player (Line view) allows you to display clips from all configured cameras.
You can navigate there from (a new window appears):
the Line view in the Monitoring tab. A new button appears:
or from the Downtime details shelf:
The main view contains several sections:
1. Cameras list
2. Calendar
3. A main clip view and the List of selected cameras in the chosen scope of time
4. Downloaded clip list
Cameras list
The tree contains a list of attached cameras in PackOS.
You can observe a maximum of 4 of them now.
Cameras view
In Plant Configuration → Cameras you will also find the list of cameras.
You can add a camera, assign it to a line, or a machine, and configure the time window (before and after the downtime starts and ends) for the video clips that are collected by the system. The Disk size input limited the scope of time when you can download the clip.
Example below shows, that the clip from the past 24h will be available for download in 1 day.
Calendar
You can go back to the display and ask for older clips.
Example for the screen above: when the clip is older than 100h (“Disk size“ input) you won’t be able to download it.
A main clip view and the List of selected cameras in the chosen scope of time
Clip preview. You can observe max 4 cameras at the same time. To change the time, move the marker left or right. The clip can last 60min max (shown at the end of the recording below)
Downloaded clip list
The download section displays the clips that you have downloaded. It will be presented in one row when you need a longer than one-minute clip.
When you press the “Clear all settings” button, all of the settings will be cleared (selected cameras and the date):